304 Stainless steel sheet Price in China ,Manufacturer of 304 Stainless Steel sheet

Stainless Steel 304 Sheet is made up of an austenitic stainless steel that has 18% chromium and 8% nickel in the composition. This is the most used grade of all stainless steels in the world. The sheets are strong, mild corrosion resistant and have applications in a variety of industries.
This is the most cost effective grade of steel. So the 304 Stainless Steel Sheet Price is lower compared to other grades of stainless steels and all metallic products in general.The low carbon version, 304L sheets are very good for welding applications as they have less carbide precipitation and less localized corrosion. The ASME SA240 Stainless Steel 304 Coil Thickness ranges up to 200mm and the width and the length ranges widely depending on the application requirements as well.

What is 304 stainless steel?

What does AISI 304 / 304L stand for?
The material "AISI 304 stainless steel / inox" is very well-known under this name in many parts of the world. The abbreviation AISI stands for "American Iron and Steel Institute". The first figure of the AISI 304 designation indicates that the material belongs to the group of austenitic stainless steels. The remaining two figures indicate the ordinal number in its category.
The material AISI 304 is often followed by the suffix L, so it is called "AISI 304L", which characterizes the low-carbon version of this inox grade. Compared to AISI 304, AISI 304L has a lower carbon content (less than 0.03 %). For this reason, this grade of stainless steel is very resistant to intergranular corrosion, but less heat-resistant than AISI 304 and is particularly suitable for applications where welding is required.
Benefits and uses of 304 stainless steel
304 stainless steel sheets are an ideal material of the “stainless steel” metal group for most applications due to their:
1.High corrosion resistance
2.Good processability
3.Good formability
Aesthetic appearance
A key characteristic of the AISI 304 (1.4301) grade, or X5CrNi18-10, is its large mass fraction of nickel and chromium (from about 10 wt% and 18 wt% accordingly). These elements provide high corrosion resistance and material strength. The inclusion of chromium in this material creates a surface oxide layer that ensures the resistance of stainless steel to certain substances and natural environmental influences such as water.

Product Parameters