Correct coating method of 304l stainless steel plate

As long as the correct coating method is used, the 304L stainless steel plate has the correct coating method, has a longer service life, and can achieve the purification effect of the transportation goal. During the operation, the two doors of the stainless steel transmission window must be kept closed. The electric lighting system has a carrying window. Please pierce the power plug first, and then connect the 220V / 50Hz power supply.

If you need to disinfect and sterilize the items carried by the stainless steel transmission window, please turn on the power switch of the ultraviolet disinfection lamp. When the door of the side transmission window is opened, the other side door is automatically locked. Therefore, when transporting goods, the door of the transmission window must be opened first.

It is necessary to place it in the transfer window, close the stainless steel transfer window door, open the door on the other side of the transfer window after the sterilization process, and the same worker removes the goods being moved. Immediately after closing the stainless steel door. So as not to affect the delivery of the following items. In some special cases, the surface of 304L stainless steel plate will be scratched and needs to be cleaned and maintained in time to improve its use value and extend its service life.

How to clean the damaged 304L stainless steel plate? Stainless steel is actually weak corrosion-resistant steel. The corrosiveness of 304L stainless steel plate depends on the alloying elements in the stainless steel plate steel. The reason why the stainless steel plate is corrosion-resistant is the reason of chromium. When the content of chromium reaches 1.2%, chromium and the corrosive medium will produce a chemical reaction to form an oxide film on the surface of the stainless steel plate. Prevent further corrosion of the internal matrix of the stainless steel plate.